Synology Network Attached Storage RX1222sas RackExpansion 12bay (Diskless) Retail

Accommodate massive storage growth

Expand your Synology rackmount SAS storage 12 bays at a time, for up to 84 additional 3.5"/2.5" SAS/SATA drives with a maximum of seven Synology RX1222sas expansion units.1 Add volumes when and where needed without interrupting services, thanks to Synology DiskStation Manager (DSM)’s online volume expansion and powerful volume management options.


Easy setup and management

Connect the RX1222sas through the included expansion cable and start managing the additional storage in minutes with Storage Manager and other intuitive tools in Synology DSM. Online volume expansion enables you to add a new volume or expand RAID volumes without reformatting drives.


Fast and stable with Synology drives

Achieve higher levels of reliability with Synology’s SAS and SATA enterprise drives. Backed by hundreds of thousands of hours of rigorous testing, they ensure maximum integration and optimal performance when paired with your Synology deployment.


Built with service uptime in mind

RX1222sas’s hot-swappable drive trays, fans, and power supplies reduce the impact of maintenance on service availability, while the redundant power supply units keep your system online even in case one power source fails.

Applied Models
Supports creating volumes across different units
SA series:SA3600, SA3400

Notes
To have better performance, we recommend creating storage volumes physically located within the same NAS or Expansion Unit, rather than creating volumes across your NAS and Expansion Unit.

Storage
Drive Bays
12

Compatible Drive Type (See all supported drives: https://www.synology.com/en-global/compatibility)
3.5" SAS HDD
3.5" SATA HDD
2.5" SATA SSD

Maximum Internal Raw Capacity
192 TB (16 TB drive x 12) (Capacity may vary by RAID types)

Hot Swappable Drive
Yes

RAID Management through Synology DSM
Yes

Notes
It is strongly recommended that you only install drives listed on your devices compatibility list. Storage pool and volume creation processes may fail when using unverified drives. Synology is unable to provide technical support for devices using unsupported components.
"Compatible drive type" indicates drives that have been tested to be compatible with Synology products. This term does not indicate the maximum connection speed of each drive bay.

External Ports
SAS IN-port
1
SAS OUT-port
1

Rack Installation Support
4-post 19" rack (Synology Rail Kit - RKS-02)
Notes
The rail kit is sold separately

Power
Power Supply Unit / Adapter
500 W

AC Input Power Voltage
100 V to 240 V AC

Power Frequency
50/60 Hz, Single Phase

Power Consumption
194.4 W (Access)
82.56 W (HDD Hibernation)

British Thermal Unit
663.48 BTU/hr (Access)
281.77 BTU/hr (HDD Hibernation)

Redundant Power Supply (for RP model)
Yes

Notes
Power consumption is measured when it is fully loaded with Synology HAS5300-8T hard drive(s).

Temperature
Operating Temperature
0^oC to 35^oC (32^oF to 95^oF)
Storage Temperature
-20^oC to 60^oC (-5^oF to 140^oF)
Relative Humidity
5% to 95% RH

Others
System Fan
80 mm x 80 mm x 4 pcs
Easy Replacement System Fan
Yes
Noise Level
54.5 dB(A)
Notes
Noise Level Testing Environment: Fully loaded with Synology SAT5200-480G SSD in the idle state. Two G.R.A.S. Type 40AE microphones, each set up 1 meter away from the Synology NAS at the front and rear. Background noise: 16.49-17.51 dB(A), Temperature: 24.25-25.75^oC, Humidity: 58.2-61.8%

Certification
FCC
CE
BSMI
UKCA
EAC
VCCI
RCM
KC