Supermicro

Supermicro MB MBD-X12STL-F-O C252 single socket S1200 Max128GB DDR4 mATX

(No reviews yet) Write a Review

We Ship worldwide all products located in or near Surrey, BC otherwise contact us prior to exporting outside of Canada.

No local pickups are allowed on any order. Same-Day Delivery Cutoff is 10AM PST.

SKU:
258689
UPC:
672042461608
MPN:
MBD-X12STL-F-O
Condition:
New
Availability:
Ships within 2 Business Days
Weight:
1 816 Grams
Item Shipping Location:
Markham, ON
Item Postal Code:
L3R 4C1
Shipping Policy:
Please contact Sales
Price and Quantity Last updated:
2/1/2024 4:51:03 PM

DISCLAIMER NOTICE

The Quantity listed on category 2,3,4 is most accurate at time and date posted to this product page.

Updates in Category 2,3,4 are not automated and are subject to change without further notice.

For rapid response, Please email the Quantity requested, SKU Code and UPC code to stockcheck@cryptocomputing.ca if you require a manual price and quantity verification prior to ordering.

Price and Quantity subject to verification prior to order acceptance and you will not be charged until verification is completed.

Current Stock Quantity shown for Pre-Order is the allocated backorder quantity provided by our suppliers.

Pre-Order ETA is subject to change without further notice after order confirmation.

Out of Stock! Check back later!

Description

Key Features
Intel Xeon E-2300 Processor, 10th Generation Intel Pentium Processor, Single Socket LGA-1200 (Socket H5) supported, CPU supports Up to 95W TDP
Intel C252
Up to 128GB Unbuffered ECC UDIMM, DDR4-3200MHz, in 4 DIMM slots
1 PCI-E 4.0 x8,
1 PCI-E 4.0 x8 (in x16 slot),
1 PCI-E 4.0 x4 (in x8 slot)1 PCI-E 3.0 x2 (in x4 slot)
M.2 Interface: 1 PCI-E 3.0 x4
M.2 Form Factor: 2280/22110
M.2 Key: M-Key
Dual LAN with 1GbE with Intel I210
Intel C252 controller for 6 SATA3 (6 Gbps) ports RAID 0,1,5,10
1 VGA D-Sub Connector port
2 SuperDOM with built-in power
5x USB 3.2 Gen1 (2 rear, 1 Type-A, 2 via header), 4x USB 2.0 (2 rear, 2 via headers)

Physical Stats
Form Factor
microATX
Dimension
9.6" x 9.6" (24.38cm x 24.38cm)

Processor
CPU
10th Generation Intel Pentium Processor, Intel Xeon E-2300 Processor
Single Socket LGA-1200 (Socket H5) supported, CPU TDP supports Up to 95W TDP
Core
Up to 8 cores

System Memory
Memory Capacity
4 DIMM slots
Up to 128GB Unbuffered ECC UDIMM, DDR4-3200MHz
Memory Type
3200/2933/2666MHz SDRAM
DIMM Sizes
4GB, 8GB, 16GB, 32GB
Memory Voltage
1.2V
Error Detection
Corrects single-bit errors

On-Board Devices
Chipset
Intel C252
SATA
Intel C252 controller for 6 SATA3 (6 Gbps) ports RAID 0,1,5,10
IPMI
ASPEED AST2600 BMC
Graphics
ASPEED AST2600 BMC
Network Controllers
Dual LAN with 1GbE with Intel I210

Input / Output
SATA
6 SATA3 (6Gbps) port(s)
LAN
2 1GbE LAN ports
USB
4 USB 2.0 port(s) (2 rear 2 via header)
5 USB 3.2 Gen1 port(s) (2 via header 2 rear 1 type A)
Video Output
1 VGA D-Sub Connector port(s)
Serial Port
2 COM Port(s) (1 header 1 rear)
DOM
2 SuperDOM (Disk on Module) power connector
TPM
1 TPM Header

Expansion Slots
PCI-E
1 PCI-E 4.0 x8 (in x16 slot),
1 PCI-E 4.0 x8,
1 PCI-E 4.0 x4 (in x8 slot),
1 PCI-E 3.0 x2 (in x4 slot)
M.2
M.2 Interface: 1 PCI-E 3.0 x4
Form Factor: 2280/22110
Key: M-Key

System BIOS
BIOS Type
256MB UEFI
BIOS Features
ACPI 6.0
SMBIOS 3.3
Plug and Play (PnP)
RTC (Real Time Clock) Wakeup
UEFI 2.7
USB Keyboard support
PCI 3.0

Management
Software
SuperDoctor 5, SUM, SPM, SSM, IPMI2.0, Watchdog
System Management Software
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations
Power-on mode for AC power recovery, ACPI Power Management

PC Health Monitoring
Voltage
VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chipset Voltage, Chassis intrusion header, 6 -fan status, 3.3V standby, +5V standby, +5V, +3.3V, +12V, +1.8V, Memory Voltages
LED
UID/Remote UID
BMC/IPMI Heartbeat LED
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) support
PECI
FAN
6x 4-pin fan headers (up to 6 fans)
Thermal control tachometer fan connectors
Fan speed control
6 fans with tachometer status monitoring
Overheat LED indication
Other Features
WOL
UID
M.2 NGFF connector
Dual Cooling Zones
CPU thermal trip support for processor protection
Control of power-on for recovery from AC power loss
Chassis intrusion detection
ACPI power management

Operating Environment
Operating Temperature Range
0oC - 50oC (32oF - 122oF)
Non-Operating Temperature Range
-20oC - 60oC (-4oF - 140oF)
Operating Relative Humidity Range
10% - 85% (non-condensing)
Non Operating Relative Humidity Range
10% - 95% (non-condensing)

Item Dimension (L"xW"xH")
NA

Weight
3 lbs

Warranty Information
1 Year

View AllClose

Please wait for the product description to load

Disclaimer

Please Verify the Product Title and Description Match the UPC Code and MPN found next to the word  "Availability." You are ordering the MPN/UPC Code found near the field "Availability" should the Title or Description have a mismatch.

The data and images provided by Crypto Computing & Electronics Canada have been subjected to numerous control mechanisms to ensure its accuracy. At all times, Crypto Computing & Electronics Canada will use best efforts to maintain its accuracy. However, if at any time the data or images provided are incorrectly priced or below fair market value or availability has substantially changed or image or descriptions contain inaccuracies, Crypto Computing & Electronics Canada shall not be held responsible or liable, furthermore Crypto Computing & Electronics Canada reserves the right to reject any orders placed based on this erroneous information.