Supermicro MB MBD-A2SDI-2C-HLN4F-O Intel Atom Mini-ITX PCIE SATA USB Brown Box

1.Intel Atom Processor C3338,
Single Socket FCBGA1310 supported,
CPU TDP support 9W
2.System on Chip
3.Up to 128GB Registered ECC DDR4-1866MHz,
Up to 32GB Unbuffered ECC/Non-ECC DDR4-1866MHz; in 2 DIMM slots
4.Expansion slots:
1 PCI-E 3.0 up to x4 (in x4 slot)*
Flexible I/O - software configurable in BIOS setup
5.4 GbE LAN ports
6.Up to 8 SATA3 (6 Gbps) ports via SoC*
Flexible I/O - software configurable in BIOS setup
7.I/O: 1 VGA, 1 COM, TPM header
8.1 USB 3.0 (Type-A)
4 USB 2.0 (2 rear, 2 via headers)
9.Supports 12V DC power input

Physical Stats
Form Factor:Mini-ITX
Dimensions:6.7" x 6.7" (17.02cm x 17.02cm)

Processor/Cache
CPU:Intel Atom^TM Processor C3338.
Single Socket FCBGA1310 supported, CPU TDP support 9W
Cores / Cache:2 cores, 2 threads / 4MB cache

System Memory
Memory Capacity:Up to 128GB Registered ECC RDIMM and DDR4-1866MHz
Up to 32GB Unbuffered ECC/non-ECC UDIMM, DDR4-1866MHz, in 2 DIMM slots
Memory Type:2400/2133/1866/1600MHz (Operating speed up to 1866MHz)
DIMM Sizes:4GB, 8GB, 16GB, 32GB, 64GB
Memory Voltage:1.2V
Error Detection:Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset:System on Chip
SATA:Up to 8 SATA3(6 Gbps) ports via SoC. Number of SATA ports is configurable via BIOS setup: 4, 6, or 8. Total combined PCI-E lanes and SATA ports is up to 8.
IPMI:ASPEED AST2400 BMC
Network Controllers:Quad LAN with Intel C3000 SoC1GbE
Graphics:Aspeed AST2400 BMC

Input / Output
LAN:4 RJ45 Gigabit Ethernet LAN ports
USB:4 USB 2.0 ports (2 rear + 2 headers),
1 USB 3.0 ports ( + 1 Type A)
Video Output:1 VGA port
Serial Port / Header:1 COM Port (1 header)
TPM:TPM Header

Expansion Slots
PCI-E:1 PCI-E 3.0 up to x4 (in x4 slot)
Number of PCI-E lane is configurable via BIOS setup: 0, 2, or 4. Total combined PCI-E lanes and SATA ports is up to 8.

System BIOS
BIOS TypeAMI UEFI
BIOS Features:UEFI 2.4
SMBIOS 2.7.1

Management
Software:IPMI2.0, KVM with dedicated LAN, NMI, SuperDoctor 5, Watchdog
Power Configurations:ATX Power connector
+12V DC Power Input
CPU thermal trip support for processor protection
Power-on mode for AC power recovery

PC Health Monitoring
Voltage:+12V, +3.3V, +5V, +5V standby, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, 4 -fan status, 4 fans with tachometer monitoring, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, System level control, System temperature, VBAT
FAN:4x 4-pin fan headers (up to 4 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control, Support 3-pin fans (w/o speed control), System level control, Thermal control tachometer fan connectors
Temperature:CPU thermal trip support
LED:UID/Remote UID
Other Features:12V DC or ATX Power Source, 4-pin 12v DC power connector, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Innovation
Engine, RoHS, SDDC, System level control, UID, WOL

Operating Environment
Operating Temperature Range:0^oC - 60^oC (32^oF - 140^oF)
Non-Operating Temperature Range:-40^oC - 85^oC (-40^oF - 185^oF)
Operating Relative Humidity Range:10% - 85% (non-condensing)
Non-Operating Relative Humidity Range:10% - 95% (non-condensing)

Item Dimension (L inchxW inchxH inch)
NA

Weight
5.00lb

Warranty Information
1 Year