Kingston

Kingston Memory KVR32N22S8 8 8GB 3200MHz DDR4 Non-ECC CL22 DIMM 1Rx8 Retail

(No reviews yet) Write a Review

We Ship worldwide all products located in or near Surrey, BC otherwise contact us prior to exporting outside of Canada.

No local pickups are allowed on any order. Same-Day Delivery Cutoff is 10AM PST.

SKU:
234840
UPC:
740617296068
MPN:
KVR32N22S8/8
Condition:
New
Availability:
Ships within 2 Business Days
Weight:
908 Grams
Width:
8 (cm)
Height:
3 (cm)
Depth:
18 (cm)
Item Shipping Location:
Markham, ON
Item Postal Code:
L3R 4C1
Shipping Policy:
Please contact Sales
Price and Quantity Last updated:
4/24/2024 7:03:56 PM

DISCLAIMER NOTICE

The Quantity listed on category 2,3,4 is most accurate at time and date posted to this product page.

Updates in Category 2,3,4 are not automated and are subject to change without further notice.

For rapid response, Please email the Quantity requested, SKU Code and UPC code to stockcheck@cryptocomputing.ca if you require a manual price and quantity verification prior to ordering.

Price and Quantity subject to verification prior to order acceptance and you will not be charged until verification is completed.

Current Stock Quantity shown for Pre-Order is the allocated backorder quantity provided by our suppliers.

Pre-Order ETA is subject to change without further notice after order confirmation.

Out of Stock! Check back later!

Description

DESCRIPTION

This document describes ValueRAM's KVR32N22S8/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:


FEATURES

• Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP = 2.5V Typical

• VDDSPD = 2.2V to 3.6V

• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals

• Low-power auto self refresh (LPASR)

• Data bus inversion (DBI) for data bus

• On-die VREFDQ generation and calibration

• Single-rank

• On-board I2 serial presence-detect (SPD) EEPROM

• 16 internal banks; 4 groups of 4 banks each

• Fixed burst chop (BC) of 4 and burst length (BL) of 8

via the mode register set (MRS)

• Selectable BC4 or BL8 on-the-fly (OTF)

• Fly-by topology

• Terminated control command and address bus

• PCB: Height 1.23” (31.25mm)

• RoHS Compliant and Halogen-Free

CL(IDD)
22 cycles

Row Cycle Time (tRCmin)
45.75ns(min.)

Refresh to Active/Refresh Command Time (tRFCmin)
350ns(min.)

Row Active Time (tRASmin)
32ns(min.)

UL Rating
94 V - 0

Operating Temperature
0oC to +85oC

Storage Temperature
-55oC to +100oC

Item Dimension (L"xW"xH")
7 x 3 x 1
Weight
1.00 LB
Warranty Information
Lifetime Manufacture

View AllClose

Please wait for the product description to load

Disclaimer

Please Verify the Product Title and Description Match the UPC Code and MPN found next to the word  "Availability." You are ordering the MPN/UPC Code found near the field "Availability" should the Title or Description have a mismatch.

The data and images provided by Crypto Computing & Electronics Canada have been subjected to numerous control mechanisms to ensure its accuracy. At all times, Crypto Computing & Electronics Canada will use best efforts to maintain its accuracy. However, if at any time the data or images provided are incorrectly priced or below fair market value or availability has substantially changed or image or descriptions contain inaccuracies, Crypto Computing & Electronics Canada shall not be held responsible or liable, furthermore Crypto Computing & Electronics Canada reserves the right to reject any orders placed based on this erroneous information. 

Related Products

Related Products