Supermicro MB MBD-X11SCZ-Q-B Ci7 i5 i3 S1151 Q370 PCIE SATA uATX Bulk Pack

8th Generation Intel® Core™ i7/i5/i3/Pentium®/Celeron® Processor ., Single Socket H4 (LGA 1151) supported, CPU TDP support Up to 95W TDP

Intel® Q370

Up to 64GB Unbuffered non-ECC UDIMM, DDR4-2666MHz, in 4 DIMM slots

1 PCI-E 3.0 x16,

2 PCI-E 3.0 x4 (in x8 slot)

M.2 Interface: 1 SATA/PCI-E 3.0 x4

M.2 Form Factor: 2280/22110

M.2 Key: M-Key

1 DVI - I port, 2 DP (DisplayPort) ports, 3 Independent Displays

Intel® Q370 controller for 5 SATA3 (6 Gbps) ports; RAID 0,1,5,10

Single LAN with Intel® Ethernet Controller I210-AT

Single LAN with Intel® PHY I219LM LAN controller

Physical Stats
Form Factor
uATX
Processor/Cache
CPU
8th Generation Intel Core^TM i7/i5/i3/Pentium/Celeron Processor .
Single Socket H4 (LGA 1151) supported, CPU TDP support Up to 95W TDP

System Memory
Memory Capacity
Up to 64GB Unbuffered non-ECC UDIMM, DDR4-2666MHz, in 4 DIMM slots
Memory Type
2666/2400/2133/1866/1600MHz Non-ECC DDR4 SDRAM 72-bit 288-pin UDIMM
DIMM Sizes
4GB, 8GB, 16GB
Memory Voltage
1.2V

On-Board Devices
Chipset
Intel Q370
SATA
Intel Q370 controller for 5 SATA3 (6 Gbps) ports
RAID 0,1,5,10
Network Controllers
Single LAN with Intel Ethernet Controller I210-AT
Single LAN with Intel PHY I219LM LAN controller
Audio
ALC 888S HD Audio
Graphics
Intel HD Graphics
3 Independent Displays

Input / Output
LAN
2 RJ45 Gigabit Ethernet LAN ports
USB
7 USB 2.0 ports (6 headers + 1 Type A)
2 USB 3.0 ports (2 headers)
6 USB 3.1 ports 4 rear + 2 headers( Type C))
Video Output
1 DVI - I port, 2 DP (DisplayPort) ports
3 Independent Displays
Serial Port / Header
4 COM Ports (4 headers)
TPM
TPM Header and Chip both

Expansion Slots
PCI-E
1 PCI-E 3.0 x16
2 PCI-E 3.0 x4 (in x8 slot)
M.2
M.2 Interface: 1 SATA/PCI-E 3.0 x4
Form Factor: 2280/22110
Key: M-Key
System BIOS
BIOS Type
AMI UEFI

Management
Software
AMT, NMI, SuperDoctor 5, vPro, Watchdog
Power Configurations
+12V DC Power Input
ATX Power connector
ACPI Power Management

PC Health Monitoring
Voltage
+1.35V, +1.5V, +1.8V, +12V, +3.3V, +5V, +5V standby, 1.05 (PCH), 5 -fan status
FAN
5x 4-pin fan headers (up to 5 fans), 5 fans with tachometer status monitoring, Dual Cooling Zone
Temperature
Thermal Control for 5 Fan Connectors
LED
N/A
Other Features
8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion header, Dual Cooling Zones, M.2 NGFF connector, RoHS

Operating Environment
Operating Temperature Range
0^oC to 60^oC (32^oF to 140^oF)
Non-Operating Temperature Range
-40^oC - 85^oC (-40^oF - 185^oF)
Operating Relative Humidity Range
10% to 85% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)

Weight
3.00 LB

Warranty Information
1 Year